NavalKleen

Concentrated Microbial Hydrocarbon Remediation Agent for Oil-Water Separators, Marine Bilges, and Oily Waste Tanks.

Product Overview

There has been an increasing mandate from governmental environmental agencies for the installation and use of Oil-Water Separators & Interceptors in Marine Industry. These new regulations have placed a heavy burden, both financial and operational, on all phases of Marine Industry. NavalKleen™ can and will help to overcome many of these expenses. NavalKleen™ has the ability to significantly reduce hydrocarbon contamination in Bilges, Oily Waste Tanks and Oil Water Separators. The added cleaning and degreasing bio-surface agent will help to keep your facility clean and safe for all personnel. NavalKleen™ is a blend of naturally occurring micro-organisms chosen for their ability to metabolize hydrocarbons in Bilges, Oily Waste Tanks and Oil Water Separators. When used in a routine maintenance program, NavalKleen™ will eliminate hydrocarbon build-up, eliminating the need to clean Bilges, pump the Oily Waste Tanks, and clean the Oily Water Separator. 

NavalKleen™can be used to remediate all petroleum hydrocarbons. The following is only a partial list of the most common contaminants, contact EnviroLogic Solutions if you have any questions about its usage.

 

How to use

NavalKleen™ is highly concentrated and effective. The following suggested uses are e following suggested uses are e following suggested uses are a general guide to the use of the product. Call for a general guide to the use of the product. Call for additional questions you may have.

GENERAL CLEANING: In a sprayer, using a ratio of 15:1 (Water to NavalKleen) spray cofferdams, decks etc.
DRY BILGES: In a sprayer or pressure washer, using a ratio of 20:1, wash the bilges or deck area. Allow the NavalKleen to consume the hydrocarbon based compounds. Operate the bilge pumps and transfer to oily waste tanks.
WET BILGES: Mix NavalKleen using a ratio of 15:1 and pour mixture into the bilges. Treat as for general cleaning.
OIL WATER SEPARATOR: Add 1% of the “OWS” capacity to the separator. Allow to re-circulate and agitate. 

Product photo
Packaging Available NKN-005 . . . . . 5 gallon cubetainer
Appearance Pale Yellow Liquid
Odor Slight Citrus
Boiling Point 212 Degrees F
Solubility in Water Complete
Aeration and Pressure The use of an industrial sprayer or pressure washer speeds the process.
Download product datasheet Download product SDS

What can we do for you?

We’ve got a solution for your industry, and we’re ready to help.

Request a Quote
wpe