Liquid Remediact

Microbial Hydrocarbon Remediation Agent

Product Overview

Liquid Remediact™ is a developed product that was created to solve soil & water hydrocarbon contamination problems. This product has the ability to bioremediate most hydrocarbons with a minimum amount of equipment, labor and cost. What sets Liquid Remediact™ apart from all other products is the high concentration of live synergistic bacteria, in a remediation liquid, that quickly starts the bioremediation process. Because of it’s relatively low cost, Liquid Remediact™ is the ideal solution for most industries to solve their own hydrocarbon contamination problems.

SEE HOW LIQUID REMEDIACT SAFELY REMEDIATED A TOLUENE SPILL

The following is a partial list of the hydrocarbons that Liquid Remediact™ can remediate:

     • CRUDE OIL
     • DIESEL FUEL, JET FUEL, GASOLINE
     • HEATING OIL
     • BENZENE, ETHYLBENZENE
     • PARAFFIN
     • LUBRICATING OIL, MOTOR OIL, CUTTING OILS
     • PAINT THINNERS, SOLVENTS, ALCOHOL
     • MINERAL SPIRITS, AROMATICS
     • TOLUENE, NAPHTHALENE, XYLENE
     • ANTI-FREEZE, TRANSMISSION FLUID
     • ORGANIC PESTICIDES, ORGANIC HERBICIDES, ORGANIC SOLVENTS
     • GREASE, TARS

Liquid Remediact™ is an active mixture of hydrocarbon-oxidizing, naturally occurring, single-celled micro-organisms with a “bio-surface cleaning agent” and water. It is specially formulated to be safe, environmentally enhancing and effective.

PRODUCT EFFECTIVENESS: The effectiveness of this product and the “speed” at which it works is determined by certain factors. In general these factors are as follows:

TEMPERATURE: The warmer the temperature, the faster this product will work.The effective operating temperature is between 42° F. & 120° F.

AERATION & PRESSURE: Aeration (air hose or “bubbler) & pressure speeds the process.

TYPE OF HYDROCARBON: Some hydrocarbons take longer than others. 

The bioremedial process generally will begin immediately but may take longer to complete depending on the above factors.

How to use

Liquid Remediact™ is highly concentrated. This product must be mixed in a ratio of 10 parts water to 1 part Liquid Remediact™. Changing this dilution is not recommended. Each mixed or diluted gallon will remediate approximately one cubic yard of soil or 200 gallons of water. Liquid Remediact™ is an exceptionally universal product and can be applied to in situ and ex situ contamination projects by any of the following methods:

Land Farming • Pressure Spraying • “Geoprobe” Injection • Monitoring Well Injection  Gravity Feed System • Automatic Dosing Equipment

 

Product photo
Packaging Available LRM-005 . . . . . 5 gallon cubitainer
Appearance Clear Liquid
Odor Orange Citrus
Soluble in Water Completely
pH Concetrate 6.9-7.2
pH Diluted 6.9-7.5
Evaporation Rate Same as Water
Download product datasheet Download product SDS

What can we do for you?

We’ve got a solution for your industry, and we’re ready to help.

Request a Quote
wpe